Turbosmart Electronic 45mm Wastegate Gen V Hyper-Gate 45

$881.96

The Turbosmart GenV Electronic PowerGate60 is the ultimate high-performance wastegate on the market. It provides the highest level of boost control in its class and cutting edge technology unmatched by anything currently on the market.

SKU: TS-0553-1502 Category: Tag:

Description

Turbosmart Electronic 45mm Wastegate

Turbosmart’s Patent Pending, eWG45 is a fully electronic actuated wastegate. Built on the successful, class-leading GenV PowerGate45 architecture, now with control never seen before.

The GenV WG60 PowerGate45 External Wastegate is a Motorsport proven, cost-effective external wastegate. The largest in the Turbosmart GenV range and the Highest Flowing Wastegate in the World.

Starting with a Turbosmart’s GenV wastegate body, you can be confident the mounting orientation will match your current manifold & outlet hardware. The GenV PowerGate45 already had class-leading flow capacity & heat handling characteristics. Now featuring the Turbosmart Patent Pending eWG actuator system, you can be sure of unparalleled control as well.

There are no springs, no hoses or boost reference signal. So those limitations are no longer an issue. No more ‘Minimum’ boost levels associated with base spring pressure or the heat-related issues with hoses. If your manifold priority is good enough, you can set your boost anywhere from zero up to ‘All of it’ – All from your laptop or tuning interface

The Turbosmart eWastegate is a brand-new way to control aftermarket wastegate valves. It involves using an electric motor to drive the position of the valve, allowing far greater control over the valve during its actuation on the car. Paired with an aftermarket ECU controlling it, you have new and safer ways to control the boost on your car.

The Turbosmart Electronic 60mm Wastegate is a cost-effective, high performing 45mm external wastegate. The Gen-V provides extensive user configurability, world leading extended thermal performance, fatigue resistance, and best in class flow performance for optimum control and longevity.

  • Liquid cooling provision
  • Strap type V-band clamps
  • User-adjustable actuator position
  • Modular actuator design
  • Full Electronic Control
  • Onboard Analog 0-5V Wastegate Position Sensor
  • Onboard Analog 0-5V Actuator Temperature Sensor

 

What Makes The New Turbosmart 45mm Electronic Wastegate Special?

Our new eWastegates are a direct fit upgrade to all 4th-generation Turbosmart wastegates and feature our unique collar-locking system, variable motor cap, and base, strap-type V-band clamps, liquid-cooling, 1/8″ NPT ports.

Control

With the introduction of the electronic motor to drive the eWastegate, a new level of control is now available to boost control. A wide range of tuning strategies can be implemented to better control boost as well as engine protection. This allows the Engine to maintain much better control with the turbo boost strategies.

Adjustability

The 5th generation eWastegate range has been designed with maximum user-adjustability, without comprising performance. We designed this unit with almost infinite possibilities of directions in which the motor assembly can be mounted with the engine bay. So, if you need the eWastegate mounted in the opposite orientation to stop fouling with parts within the engine bay, there is an orientation that is suitable for the eWastegate to operate in. This mixed without the need of having to remove and reassemble due to changes in base wastegate spring pressure the eWastegate has next-level control adjustability of the position of the wastegate valve.

Upgrades and Servicing

Because of the modular construction, the new range is also upgradeable and completely serviceable. All components can be removed or upgraded. Components are tested for over one million cycles for rock-solid reliability.

Flow and Thermal Performance

Our new range of wastegates out-flow all competitors thanks to our world-leading engineering and simulation abilities. Improved Thermal performance drastically outperforms any rival wastegate. All wastegates feature liquid cooling ports for further thermal performance if required.

Common Questions

WILL AN E-WG FIT MY EXISTING MANIFOLD?

Yes. The Turbosmart e-WG range works with the modular housings of the Gen-V products, so wherever your Turbosmart Gen-V products are fitted, the e-WG will bolt on as they use the same mounting & flange orientation. The Actuator housings of the new e-WG range are different though, so you’ll need to make sure there is room for the new design in your engine bay.

HOW FAST IS THE E-WG RANGE?

21mm per second – Full travel can be achieved in 600ms. Fast.

WHAT SPRING OPTIONS DOES THE E-WG RANGE HAVE?

Just the one option: None. The Turbosmart e-WG is fully adjustable without the need for springs. It can actuate boost against extreme levels of backpressure and does so without any springs. Nothing to change, ever. It also features a special ‘zero-backdrive’ to further bolster its ability against high drive pressures.

HOW MANY WIRES DOES THE E-WG HAVE?

The Turbosmart e-WG has 5 wires, 2 for motor control and 3 for the onboard position sensor.

CAN I USE AN E-WG INSTEAD OF MY COMPRESSED GAS (CO2) SETUP?

Yes you can – In fact, it’s one of the situations that the e-WG would be ideal for. You will not need the external compressed gas tank, the lines or the solenoid – You just need the e-WG.

WHAT DO I NEED TO CONTROL IT?

You will need a programmable ECU (Engine Control Unit). You will need a ‘high current’ (20amp) output and a spare analogue input to make it work. Most quality ECU’s have the capability to drive the gate for accurate boost control. Best speak to your specialist, or calibrator about your needs if you have any questions on what is needed.